Tools
ToolsIndustrial, Concrete & Masonry ToolsDiamond Core BitsAccessories
5/8"-11FEM.TO 1-1/4"-7MALE ADAPT
 |
|||
| SKU | CBSA2/1 | |
Fasteners Resource |
| Cat Page | F-17 |
||
| Description | Diamond Wet Core Bit Subadapters Accessory, 5/8"-11 Female Thread at Top, 1-1/4"-7 Male Thread at Bottom, 1 per Pack |
||
| Price | $339.57 / 1 | ||
$339.57 |
|||
Products
- Abrasives
- Bonded Abrasives
- MegaCut® Abrasive Saw Blades
- MegaCut® Circular Saw Wheels
- MegaCut® Cut-Off Wheels
- MegaCut® Depressed Center Cut-Off Wheels
- MegaCut® Depressed Center Grinding Wheels
- MegaCut® Extra Strength Triple Reinforced Wheels
- MegaCut® Thin Cut-Off Wheels
- MegaCut® Type 28 "Saucer" Type Wheels
- MegaGrind Bench & Pedestal Grinding Wheels
- MegaGrind Resinoid Cup Wheels - Type 11
- MegaGrind Semi-Flexible Discs
- MegaGrind Surface Grinding Wheels
- Monolock® Mounted Point
- Mounted Point
- Steel Mandrels
- Wheel Dressers
- Coated Abrasives
- Accessories
- Accessories For Resin Fibre Discs
- Back-Up Pads For Resin Fibre Discs
- Hook & Loop Disc Holder
- Hook & Loop Hand Pad
- Hook & Loop Surface Conditioning Disc Pads & Holders
- Hook & Loop To PSA Conversion
- PSA Disc Holders
- PSA Paper Disc Holder
- PSA To Hook & Loop Conversion
- Quick Change Disc Holders
- Round Hand Sander
- Sanding Rubber Blocks with Nails
- Accessories For Resin Fibre Discs
- Cloth Belts
- Aluminum Oxide Cloth
- 1" x 30"
- 1" x 36"
- 1" x 42"
- 1-1/2" x 24"
- 1-1/2" x 60"
- 1-1/2" x 72"
- 1/2" x 24"
- 10" x 70-1/2"
- 2" x 132"
- 2" x 36"
- 2" x 42"
- 2" x 48"
- 2" x 60"
- 2" x 72"
- 2-1/2" x 48"
- 2-1/2" x 60"
- 2-1/2" x 72"
- 3" x 132"
- 3" x 168"
- 3" x 18"
- 3" x 21"
- 3" x 24"
- 3" x 60"
- 3" x 72"
- 3" x 90"
- 3-1/2" x 15-1/2"
- 3/4" x 18"
- 3/4" x 20-1/2"
- 4" x 106"
- 4" x 132"
- 4" x 168"
- 4" x 21"
- 4" x 21-3/4"
- 4" x 24"
- 4" x 36"
- 4" x 48"
- 4" x 54"
- 4" x 60"
- 4" x 90"
- 6" x 132"
- 6" x 168"
- 6" x 48"
- 6" x 60"
- 8" x 107"
- 1" x 30"
- Aluminum Oxide Cloth Wide Belts
- Belt Cleaning Sticks
- Silicon Carbide Cloth
- Zirconia Cloth
- 1" x 30"
- 1" x 42"
- 1-1/2" x 60"
- 1/2" x 12"
- 1/2" x 18"
- 1/2" x 24"
- 1/4" x 18"
- 1/4" x 24"
- 10" x 70-1/2"
- 2" x 132"
- 2" x 48"
- 2" x 60"
- 2" x 72"
- 2-1/2" x 60"
- 2-1/2" x 72"
- 3" x 132"
- 3" x 24"
- 3" x 72"
- 3-1/2" x 15-1/2"
- 3/4" x 18"
- 3/4" x 20-1/2"
- 3/4" x 24"
- 3/8" x 13"
- 4" x 132"
- 4" x 168"
- 4" x 24"
- 4" x 36"
- 4" x 60"
- 4" x 72"
- 6" x 132"
- 6" x 48"
- 1" x 30"
- Aluminum Oxide Cloth
- Disc Holder
- Flap Wheels
- Floor Finishing
- Hook & Loop Back Stearated Paper Discs
- Hook & Loop Back Stearated Paper Discs 2"
- MEGACUT® Flap Discs
- Premier Red Dri-Lube Paper Discs/Rolls
- PSA Heavy Duty Resin Paper Discs
- PSA Resin Cloth Discs
- PSA Stearated Paper Discs
- Quick Change Discs
- Resin Fibre Discs
- Rolls
- PSA Gold Refill Rolls
- PSA Paper Rolls
- PSA Resin Paper Rolls
- Resin Cloth Rolls
- Resin Cloth Rolls, Heavy Duty
- Shop Rolls, Handy Rolls, Plumber's Rolls
- Cloth Shop Rolls
- Combo Pack
- Handy Shop Rolls
- Non-Woven Abrasive Clean & Finish Rolls
- Plumber's Rolls
- Sandscreen Plumber's Rolls Silicon Carbide
- Screen Cloth Plumber's Rolls Combo Pack Silicon Carbide
- Screen Cloth Silicon Carbide
- Shop Rolls General Purpose
- Wet/Dry Combo Pack
- Wet/Dry Waterproof Cloth Aluminum Oxide
- Sheets
- Trim-Kut® Discs
- Accessories
- Non-Woven Abrasives
- Deburring Wheels
- Duplex Interleaf Flap Wheels
- Felt Polishing Flap Discs
- Felt Polishing Flap Wheels
- Goblet Wheels
- Hand Pads & Sponges
- Heavy Duty Finishing Discs
- Hook & Loop Surface Conditioning Discs
- Mounted Finishing Disc Wheels
- Non-Woven Flap Wheels
- Non-Woven Surface Conditioning Belts
- Stripper Wheels & Discs
- Surface Conditioning Bands
- Surface Conditioning Eyelet Stars
- Surface Preparation Wheels
- Unitized Wheels
- Specialty Abrasives
- Bonded Abrasives
- Adhesives & Sealants
- Fasteners
- Anchors
- Concrete Screws
- Double Expansion
- Drop-In
- Expansion Pin, Zinc Yellow
- Hammer Drive, Mushroom Head
- Hollow Wall
- Lag Screw Shields
- Lead Wood Screw Anchor
- Machine Screw
- Nylon Hammer Drive
- Plastic Anchor
- Plastic Anchor Kits
- Setting Tools
- Single Expansion
- Sleeve
- Split Drive
- T-Anchors, Zinc Yellow
- Toggle
- Wallboard, "One-Step"
- Wedge
- Bolts
- Anchor Bolts, Bent
- B-7 Bolts & Studs
- Battery, Square Head
- Carriage Bolts
- Elevator Bolts
- Eye, Closed End
- Eye, Open End
- Flange/Frame Bolts
- Hanger Bolt Drivers
- Hanger Bolts
- Hex Head Cap
- Machine Bolts
- Metric
- Military-Spec
- Plow Bolts
- Step Bolts
- Structural Bolts
- Tap Bolts
- Toggle Bolts
- Track, Ribbed Neck
- Anchor Bolts, Bent
- Clips, Bits, Pins & Hooks
- Bits, Bit Holders and Nutsetters
- Hooks
- Pins
- Coiled Spring Pins, Plain Stl/Oil
- Cotter Pins, Steel Zinc
- Dowel Pins, Bright
- Dowel Pins, Ebony
- Hitch Pin Clips, Zinc
- Slotted Spring Pins, 18-8 Stainless Steel
- Slotted Spring Pins, 420 Stainless Steel
- Slotted Spring Pins, METRIC Steel, Thermal Black
- Slotted Spring Pins, MS16562 Stl Zinc Phos
- Slotted Spring Pins, Steel Black and Oiled
- Slotted Spring Pins, Steel Zinc
- Coiled Spring Pins, Plain Stl/Oil
- Type U Speed clips
- Metric Fasteners
- Electronic Hardware
- Hex Flange Bolts
- Hex Head Cap Screws
- Machine Screws
- Nuts
- Cage Nuts, Steel Zinc
- Clinch Nuts, Steel Zinc
- DIN 439 B Hex Jam
- DIN 6923 Hex Flange
- DIN 934 Hex
- DIN 985 Nylon Insert
- Lock Nuts
- External Tooth K-Lock, A2 SS
- External Tooth K-Lock, Stl Zinc
- Nylon Insert DIN 985 A4 SS
- Nylon Insert DIN 985, 18-8 SS
- Nylon Insert DIN 985, Steel Zinc
- Prevail Torque DIN 6926 Nylon Insert
- Prevail Torque DIN 980V
- Prevail Torque IFI B18.16.3M
- Serrated, DIN 6923 Class 10 Zinc
- Serrated, DIN 6923 Class 8 Zinc
- Top Lock Flange, DIN 6927
- External Tooth K-Lock, A2 SS
- Weld Nuts
- Wing Nuts
- Cage Nuts, Steel Zinc
- Pins
- Rivet Nuts
- Sems Screws
- Sockets- Hex & Six-Lobe
- Thread Forming Screws
- Thread Rolling Screws
- Washers
- Woodworking Screws
- Military Hardware
- Hex Cap Screws
- Hex Nuts
- Machine Screws
- MS24693 100-deg Flat Phil Coarse & Fine Stl Cad Y
- MS24693 100-deg Flat Phil Coarse&Fine SS w/Blk Ox
- MS24693-C 100-deg Flat Phil Coarse & Fine SS-DFAR
- MS35190 82-deg Flat Phil Coarse Stl Cad
- MS35191 82-deg Flat Phil Fine Stl Cad
- MS35206 Pan Phil Coarse Steel Cad Y
- MS35207 Pan Phil Fine Steel Cad Y
- MS35265 Drilled Slotted Fillister, Coarse Stl Cad
- MS35266 Drilled Slotted Fillister, Fine Stl Cad
- MS35275 Drilled Slotted Fillister Coarse SS
- MS35276 Drilled Slotted Fillister Fine SS
- MS51957 Pan Phil Coarse SS
- MS51957 Pan Phil Coarse SS w/Blk Ox
- MS51958 Pan Phil Fine SS
- MS51958 Pan Phil Fine SS w/Blk Ox
- MS51959 82-deg Flat Phil Coarse SS
- MS51960 82-deg Flat Phil Fine SS
- MS24693 100-deg Flat Phil Coarse & Fine Stl Cad Y
- Pins
- Self-Tapping Screws
- Socket Screws
- Washers
- AN960 Flat Stl Cad y
- AN960-C Flat 18-8 SS
- AN960-CL Flat 18-8 SS
- AN960-L Flat Stl Cad Y
- AN970 Flat Stl Cad Y
- MS15795 Flat 300-series SS
- MS15795 Flat 300-series SS w/Black Oxide
- MS27183 Flat Stl Cad
- MS35333 Int. Tooth 410 SS
- MS35333 Int. Tooth Mechanical Z Yellow
- MS35333 Int. Tooth Stl Cad II
- MS35335 Ext. Tooth 410 SS
- MS35338 Split Lk 316 SS
- MS35338 Split Lk 400-series SS
- MS35338 Split Lk Stl Cad II
- MS35338 Split Lk Stl Zinc Yellow
- MS51848 High Collar Split Lk, Stl Black Phos
- MS51848 High Collar Split Lk, Stl Zinc-II
- NAS1149 Flat Light series SS
- NAS1149 Flat SS
- NAS620 Flat 300-series SS
- NAS620 Light Flat 300-series SS
- AN960 Flat Stl Cad y
- Nuts
- Automotive, Light Hex
- Cage
- Cap
- Castle
- Clinching
- Conduit, Die Cast Zinc
- Coupling
- Flange (No Serrations)
- Flange, Serrated
- Flex Type Lock Nuts
- Hex Jam
- Hex Jam, Heavy
- Hex, Finished
- Hex, Heavy
- Hex, Nylon
- High Hex, Grade 8
- K-Lock
- Left-Handed Threaded Hex
- Machine Screw
- Metric
- Mil-Spec
- Nylon Insert
- Panel (Pipe)
- Regular Square
- Reversible, 2-Way
- Right Hand Wheel
- Rivet Nuts
- Slotted
- Square
- Steel Spring
- Stover®-Equivalent
- Tee
- Top Lock
- Weld Nuts
- Wing
- Automotive, Light Hex
- Retaining Rings
- Rivets
- 3-Star™ Bulb Type
- Blind Threaded Inserts
- Drive Pin
- Multi-Grip
- Standard Blind
- Structural Rivets
- Tools and Tool Parts
- Screws
- Cap, Flat Slotted Steel Zinc
- Concrete
- Deck and Drywall
- Deck, Bugle Phillips
- Deck, Bugle Six-Lobe
- Deck, Bugle Square Recess
- Deck, Flat Six-Lobe
- Deck, Flat Square Recess
- Drywall, Bugle Phillips
- Drywall, Bugle Six-Lobe
- Drywall, Bugle Square Recess
- Drywall, Modified Truss Phillips
- Drywall, Trim Head
- Drywall, Wafer Phillips High-Low Sharp Pt
- Framing, Pan Phillips
- Particle Board, Bugle Phillips
- Dowel, Steel Zinc
- Drive, Round Head Type-U
- Eye, Closed-End, Steel Zinc
- Flange
- Hex Head Cap Screw
- Jack, Hex
- Lag
- Machine
- 100° Flat
- 100° Flat Undercut
- 82° Flat
- 82° Flat Undercut
- Binding Undercut
- Fillister
- Hex
- Hex Washer
- Hex Washer, Serrated
- Metric
- Military-Spec
- MS24693 Coarse, Steel Cad Yellow
- MS24693, Coarse, 18-8 SS w/Blk Ox-DFAR Compliant
- MS24693-C, Coarse, 300-series SS-DFAR Compliant
- MS35206, Coarse, Steel Cad Yellow
- MS35207, Fine, Steel Cad Yellow
- MS35265 Steel Cad
- MS35266 Steel Cad
- MS35275 300 Series SS
- MS35276, Fine, 300 Series SS
- MS51957, Coarse, 18-8 SS w/Blk Ox
- MS51957, Coarse, 300-series SS
- MS51958, Fine, 18-8 SS w/Blk Ox
- MS51958, Fine, 300-series SS
- MS51959, Coarse, 18-8 SS
- MS51960, Fine, 18-8 SS
- MS24693 Coarse, Steel Cad Yellow
- Oval
- Oval Undercut
- Pan
- Round
- Round Washer Phillips, Zinc
- Truss
- Truss, Serrated
- Self-Drilling
- 82° Flat
- 82° Flat Ucut
- Bugle Phillips
- Hex Flange, Unslotted w/Rubber Washer
- Hex Washer
- Combination, Steel Zinc
- Phillips
- Slotted
- Unslotted
- 18-8 Stainless
- 18-8 Stainless w/Neo-EPDM Washer
- 410 Stainless, #2 & #3 Pt
- 410 Stainless, #2 & #3 Pt w/Black Ox
- 410 Stainless, #4 Point
- 410 Stainless, #5 Point
- 410 Stainless, w/Neo-EPDM Washer
- Steel Black Oxide
- Steel Zinc Black
- Steel Zinc, #4 Point
- Steel Zinc, #5 Point
- Steel Zinc, 1/4" Diam w/#12 Head
- Steel Zinc, 7/16 AF, #3 & #4 Pt.
- Steel Zinc, Full Thread, #1 Point
- Steel Zinc, Full Thread, #2 & #3 Point
- Steel Zinc, High Head
- Steel Zinc, Partial Thread
- Steel Zinc, w/Neo-EPDM Washer #2 & #3 Pt.
- Steel Zinc, w/Neo-EPDM Washer #5 Pt.
- Stl Silvr Ruspert #2 Pt--1000 Hr Rated
- Stl Silvr Ruspert #4 Pt--1000 Hr Rated
- Stl Silvr Ruspert Standrd Pt--1000 Hr Rated
- Stl Silvr Ruspert w/EPDM Wshr--1000 Hr Rated
- Stl Silvr Ruspet #1 Stitch Pt--1000 Hr Rated
- w/ Machine Screw Thread
- 18-8 Stainless
- Combination, Steel Zinc
- Hex Washer, Serrated
- Hex, Unslotted, Steel Zinc
- Oval Phillips
- Oval Phillips Undercut
- Pan
- Round Washer
- Self-Drilling SEMS
- Trim Head
- Truss
- Truss, Modified
- Wafer Phillips
- Wafer Six-Lobe
- Wafer Square Recess
- Wafer Square-Phillips Recess
- Self-Piercing
- Self-Tapping
- High-Low
- Type-A
- Type-AB
- Type-B
- Sems (Machine Screw Thread)
- Socket
- Thread-Cutting
- Type-1
- Type-23
- Type-25
- Type-F
- Thread-Rolling
- EJOT® PT®-Alternative, Metric
- Plas-Fix®45 and Plastite®-Alternate,Metric
- Plastite®-Alternative, Inch Sizes
- Taptite®-Alternative, Inch Sizes
- Thumb and Wing
- Weld
- Wood / Woodworking
- Deck
- Deep Thread / Cabinet Screws
- #8 Flat with #17 point
- Flat
- Phillips w/Nibs, Steel Black Ox, Full Thread
- Phillips w/Nibs, Steel Black Ox, Partial Thread
- Phillips w/Nibs, Steel Zinc, Full Thread
- Phillips w/Nibs, Steel Zinc, Partial Thread
- Phillips, Steel Black Ox, Full Thread
- Phillips, Steel Black Ox, Partial Thread
- Phillips, Steel Nickel, Full Thread
- Phillips, Steel Zinc, Full Thread
- Phillips, Steel Zinc, Partial Thread
- Square Recess, Stl Black Ox, Full Thread
- Square Recess, Stl Black Ox, Partial Thread
- Square Recess, Stl Zinc, Full Thread
- Square Recess, Stl Zinc, Partial Thread
- Square/Phillips, Stl Black Ox, Full Thread
- Square/Phillips, Stl Black Ox, Partial Thread
- Square/Phillips, Stl Zinc, Full Thread
- Square/Phillips, Stl Zinc, Partial Thread
- Phillips w/Nibs, Steel Black Ox, Full Thread
- Flat Undercut with #17 point
- Flat with #17 point
- Phillips w/No Nibs, Steel Black Oxide, Full Thread
- Phillips w/No Nibs, Steel Black Oxide, Part Thread
- Phillips w/No Nibs, Steel Zinc, Full Thread
- Phillips w/No Nibs, Steel Zinc, Part Thread
- Phillips, Steel Black Oxide, Full Thread
- Phillips, Steel Black Oxide, Partial Thread
- Phillips, Steel Zinc, Full Thread
- Phillips, Steel Zinc, Partial Thread
- Six-Lobe w/Nibs, Steel Zinc, Full Thread
- Six-Lobe w/Nibs, Steel Zinc, Part Thread
- Square Recess (No Nibs), Stl Blk Ox, Part Thread
- Square Recess (No Nibs), Stl Nickel, Full Thread
- Square Recess (No Nibs), Stl Zinc, Full Thread
- Square Recess (No Nibs), Stl Zinc, Partial Thread
- Square Recess, Stl Black Ox, Full Thread
- Square Recess, Stl Black Ox, Partial Thread
- Square Recess, Stl Zinc, Full Thread
- Square Recess, Stl Zinc, Partial Thread
- Square-Phillips w/Nibs, Stl Black Ox Full Thrd
- Square-Phillips w/Nibs, Stl Black Ox Part Thrd
- Square-Phillips w/Nibs, Stl Zinc Part Thrd
- Phillips w/No Nibs, Steel Black Oxide, Full Thread
- Large Flat Hd
- Large Flat Hd with #17 point
- Large Round Washer
- Large Round Washer with #17 point
- Low Profile Pan Hd
- Pan
- Pan with #17 point
- Phillips, 18-8 Stainless, Full Thread
- Phillips, Steel Black Ox, Full Thread
- Phillips, Steel Black Ox, Partial Thread
- Phillips, Steel Zinc, Full Thread
- Phillips, Steel Zinc, Partial Thread
- Square Recess, 18-8 SS, Full Thread
- Square Recess, Stl Zinc, Full Thread
- Square Recess, Stl Zinc, Partial Thread
- Square-Phillips Steel Zinc, Full Thread
- Square-Phillips, Steel Black Ox, Full Thread
- Square-Phillips, Steel Black Ox, Partial Thread
- Square-Phillips, Steel Zinc, Partial Thread
- Phillips, 18-8 Stainless, Full Thread
- Round Washer
- Round Washer with #17 point
- Six-Lobe, Stl Blk Ox Full Thread
- Square Recess, Stl Black Ox, Full Thread
- Square Recess, Stl Black Ox, Partial Thread
- Square Recess, Stl Zinc Yellow, Partial Thrd
- Square Recess, Stl Zinc, Full Thread
- Square Recess, Stl Zinc, Partial Thread
- Square/Phillips, Stl Black Ox Full Thrd
- Square/Phillips, Stl Blk Ox Partial Thrd
- Square/Phillips, Stl Zinc, Full Thread
- Square/Phillips, Stl Zinc, Partial Thread
- Six-Lobe, Stl Blk Ox Full Thread
- Round Washer with Long #17 point
- Truss
- Truss with #17 point
- Exterior
- Face Framing
- Hinge Screws
- Installation Screws, High-Low Thread, Ty-17 Pt
- Pole Barn Screw
- Standard
- Cap, Flat Slotted Steel Zinc
- Spacers, Standoffs & Electronic Hardware
- Stainless Steel
- Anchors
- Bolts
- Cap Screws, Hex
- Drive Screws
- Drywall & Deck
- Electronic Hardware
- Flange Screws, 18-8
- Lag Screw, Hex, 18-8
- Machine Screws
- Metric Fasteners
- Military Hardware
- Nuts
- Pins
- Retaining Rings
- Rivets
- Self-Drilling
- 82° Flat
- 82° Flat Ucut Phillips
- Hex Washer
- Hex Washer, Serr, Unslotted
- Oval Phillips
- Oval Undercut Phillips, 18-8
- Pan Phillips
- Pan Six-Lobe, 18-8
- Pan Six-Lobe, 410 Stainless
- Pan Square Recess
- Truss Phillips, Modified
- Wafer Phillips
- Wafer Six-Lobe, 18-8
- Self-Piercing
- Self-Tapping
- High-Low
- Type AB
- Type-A
- Type-B
- Sems
- Sockets
- Thread-Cutting
- Thread-Rolling
- Thumb Screws
- Washers
- Wood
- Studs- Clinch & B7
- Washers
- Beveled, Plain
- Countersunk
- Dock
- Flat
- Fender
- Fender, Extra Heavy
- Machine Screw
- S.A.E.
- Standard
- Thru-Hardened and Structural
- F436 Round Structural, Plain
- S.A.E. Extra Thick, Zinc Yellow--Made in USA
- S.A.E. for Gr-5 & Gr-8 applications, Zinc Yellow
- S.A.E. for Gr-9 applications, EcoGuard Gray/Silver
- U.S.S. Extra Thick, Plain
- U.S.S. Extra Thick, Zinc Yellow--Made in USA
- U.S.S. for Gr-5 & Gr-8 applications, Zinc Yellow
- U.S.S. for Gr-9 applications, EcoGuard Gray/Silver
- F436 Round Structural, Plain
- Type B
- U.S.S.
- Metric
- Military-Spec
- AN960 Flat Stl Cad y
- AN960-C Flat 18-8 SS
- AN960-CL Flat 18-8 SS
- AN960-L Flat Stl Cad Y
- AN970 Flat Stl Cad Y
- MS15795 Flat 300-Series
- MS15795 Flat 300-Series w/Black Ox
- MS27183 Flat Stl Cad
- MS35333 Int. Tooth 410SS
- MS35333 Int. Tooth Stl Cad-II
- MS35335 Ext. Tooth 410 SS
- MS35338 Split Lk 316 SS
- MS35338 Split Lk 400-series SS
- MS35338 Split Lk Stl Zinc Yellow
- MS35338 Split Lk Stl Cad-II
- MS51848 High Collar Split Lk, Stl Black Phos
- MS51848 High Collar Split Lk, Stl Zinc-II
- NAS1149 (AN960-CLNA) Flat 18-8
- NAS1149 Flat 18-8 SS
- NAS620 Flat 300-series SS
- NAS620 Light Flat 300-series SS
- AN960 Flat Stl Cad y
- Nylon
- Sealing
- Split Lock
- Tooth Lock
- Beveled, Plain
- Weld Screws & Nuts
- Wire Wheels, Brushes, Files & Rasps
- Files & Rasps
- American Pattern Files & Rasps
- All Purpose (Handy) File-Farmer's Own
- Aluminum Files
- Bent Body Files
- Body Bumping-Flat Files
- Body Bumping-Half Round Files
- Cabinet Rasps-Half Round
- Chain Saw Files-Flat
- Chain Saw Files-Round
- Diamond Cut Flat Files
- Diamond Cut Half Round Files
- Dual File With Handle
- Farrier Rasp File
- Fast Mill Files
- Flat Files
- Half Round Files
- Hand Files
- Knife Files
- Long Angle Lathe Files
- Mill Blunt Files-Two Round Edges
- Mill Files
- Milled Curved Tooth Files
- Pipeliner Files-Half Round
- Rapid Cross-Cut Files
- Round Files-"Rat Tails"
- Shoe Rasp (Four-in-hand)
- Square Files
- Taper Saw Files
- Three Square Files
- Wood Rasps-Flat
- Wood Rasps-Half Round
- All Purpose (Handy) File-Farmer's Own
- File Grips
- File Sets
- Swiss Pattern Files & Sets
- American Pattern Files & Rasps
- Wire Wheels & Brushes
- Files & Rasps
- Anchors
- Safety
- Barricade Tapes
- Cold Weather Gear
- Confined Space Protection
- Emergency Response
- Ergonomics
- Eye Protection
- Fall Protection
- First Aid
- Footwear
- Hand Protection
- Hazardous Storage
- Head & Face Protection
- Hearing Protection
- Heat Stress Products
- Hi-Viz Clothing
- Industrial Markers
- Instrumentation
- Lighting
- Lockout/Tagout
- Protective Clothing
- Respiratory Protection
- Safety Cutters
- Showers and Eyewash
- Sorbents
- Tapes & Adhesives
- Water Safety
- Welding and Fire Resistant Safety
- Wipes and Cleaners
- Barricade Tapes
- Tools
- Drill Accessories
- Drilling/Cutting/Hole Making Tools
- Aircraft Extension/Extra Length Drills
- Aircraft Extension, Type B, 12" Overall Length
- Aircraft Extension, Type B, 6" Overall Length
- Cobalt Aircraft Extension, Type J, 12" OAL
- Cobalt Aircraft Extension, Type J, 6" OAL
- Extra Long, 12" Overall Length
- Extra Long, 12" Overall Length, 1/2" Shank
- Extra Long, 18" Overall Length
- Extra Long, 8" Overall Length
- Annular Hole Cutters
- Carbide Tipped Hole Cutters
- Combination Drill & Tap
- Countersinks/Counterbores
- Drill Accessories
- Hole Enlarging Core Drills
- Hole Saws
- Jobber Length Drills
- 3-Flattened Shank - Heavy Duty
- Blitz Bits® - Heavy Duty
- Blitz Nitride®
- Bullet Pilot-Point®
- Carbide Tipped
- Carbide Tipped Die Drills
- Cobalt Bullet Pilot-Point®
- Cobalt Left Hand
- Cobalt NAS Type J - Heavy Duty
- Drill Blanks
- General Purpose - Alfa USA®
- General Purpose - Eco Pro®
- General Purpose - TiN Coated
- Heavy Duty - Alpha USA®
- Heavy Duty - Eco Pro®
- Heavy Duty - TiN Coated
- Heavy Duty - TiN Tipped
- Left Hand
- Metric
- 3-Flattened Shank - Heavy Duty
- Mechanic's Length Drills
- ProBits® Multi-Step Drills
- Reamers
- Adjustable Hand
- Blitz® Car Alignment
- Blitz® Structural
- Bridge, Spiral Flute
- Bridge, Straight Flute
- Car Alignment, 7/16" Hex Shank
- Chucking
- Hand, Spiral Flute
- Hand, Straight Flute
- Metric Chucking
- Over/Under Size Chucking
- Plumber's
- Repairman's
- Solid Carbide Chucking
- Structural
- Taper Pin-Straight, Spiral & Helical Flute
- Adjustable Hand
- Reduced Shank Drills
- 1/4" Shank-Economy/Intermediate Length
- 1/4" Shank-Jobber Length
- 3/8" Shank-Jobber Length
- 3/8" Shank-Jobber Length, Heavy Duty
- Blitz Bits®, 3/8" Shank-Jobber Length
- Blitz Bits®, 3/8" Shank-Mechanic's Length
- Silver & Deming Blitz Bits®, 1/2" Shank
- Silver & Deming Carbide Tipped, 1/2" Shank
- Silver & Deming Cobalt, 1/2" Shank
- Silver & Deming Metric, 1/2" Shank
- Silver & Deming, 1/2" Shank-Alfa USA
- Silver & Deming, 1/2" Shank-Eco Pro
- Silver & Deming, 3/4" Shank
- 1/4" Shank-Economy/Intermediate Length
- Screw Machine Length Drills
- Solid Carbide Drills
- Specialty Drills
- Taper Length Drills
- Taper Shank Drills
- Aircraft Extension/Extra Length Drills
- Industrial, Concrete & Masonry Tools
- Carbide Hammer Drill Bits
- Core Cutters for Rotary Hammer Drills
- Duo Spline Shank Rotary Hammer Drill Bits
- Hammer Drill Adaptors
- Hammer Drill Adaptors Extension Systems
- Quadro Spline Shank Rotary Hamme Drill Bits
- Rotary Rebar Cutters
- Roto-Percussion Drill Bits
- SDS Drill Stop
- SDS- 4x4 Quadro Hammer Drill Bits
- SDS-Max™ Duo Hammer Drill Bits
- SDS-Max™ Quadro Hammer Drill Bits
- SDS-Plus Rotary Hammer Drill Bits
- Core Cutters for Rotary Hammer Drills
- Chisels - Masonry
- Core Bits For Rotary Hammer Drills
- Diamond & Carbide Tipped Drills Bits
- Diamond Core Bits
- Masonry Drill Bits
- Tapcon® - SDS Plus Bits & Screws
- Carbide Hammer Drill Bits
- Jobber Length Drills
- Machining Tools
- Burrs
- Deburring Tools
- End Mills
- Cobalt Roughing End Mills
- Cobalt Steel End Mills
- High-Speed Steel End Mills
- Solid Carbide End Mills
- Four Flute/Center Cutting
- Double End Stub, AlTiN Coated
- Double End Stub, Uncoated
- Double End, AlTiN Coated
- Double End, Uncoated
- High Performance Ball, Variable Helix, AlTiN Coated
- High Performance Variable Helix, AlTiN Coated
- Single End Ball, AlTiN Coated
- Single End Ball, Uncoated
- Single End Metric, AlTiN Coated
- Single End Metric, Uncoated
- Single End Stub, AlTiN Coated
- Single End Stub, Uncoated
- Single End X-Long, AlTiN Coated
- Single End X-Long, Uncoated
- Single End, AlTiN Coated
- Single End, Corner Radius, AlTiN Coated
- Single End, Corner Radius, Uncoated
- Single End, Uncoated
- Double End Stub, AlTiN Coated
- Solid Carbide Roughing End Mills
- Thre Flute/Center Cutting
- Three Flute/Center Cutting
- Two Flute/Center Cutting
- Double End Stub, AlTiN Coated
- Double End Stub, Uncoated
- Double End, AlTiN Coated
- Double End, Uncoated
- Single End Ball, AlTiN Coated
- Single End Ball, Uncoated
- Single End Metric, AlTiN Coated
- Single End Metric, Uncoated
- Single End Stub, AlTiN Coated
- Single End Stub, Uncoated
- Single End, AlTiN Coated
- Single End, Uncoated
- Single End, X-Long, AlTiN Coated
- Single End, X-Long, Uncoated
- Double End Stub, AlTiN Coated
- Four Flute/Center Cutting
- HSS Cutters
- Tool Bits
- Saws & Woodworking
- Chisels/Striking Tools/Saws
- Forstner Bits
- MegaCut® Circular Saw Blades
- Reciprocating & Jig Saw Blades
- Air Saw Bi-Metal Blades
- Bi-Metal Cobalt Band Saw Blades
- Carbide Grit Rod Saws
- Cobalt Bi-Metal Hacksaw Blades
- Hand Hacksaw Frames
- Jig Saw Carbide Grit Edge T-Shank Blades
- Jig Saw Carbide Strip T-Shank Blades
- Jig Saw Carbide Tipped T-Shank Blades
- Jig Saw Cobalt Bi-Metal Blades
- Jig Saw Cobalt Bi-Metal T-Shank Blades
- Jig Saw Cordless T-Shank Blades
- Jig Saw High-Carbon Steel Blades
- Jig Saw High-Carbon Steel T-Shank Blades
- Recip. Carbide Grit Edge Saw Blades
- Recip. Carbide Strip Saw Blades
- Recip. Carbide Tipped Saw Blades
- Recip. Cobalt Bi-Metal Saw Blades
- Recip. Demolition Saw Blades
- Recip. Diamond Grit Edge Saw Blades
- Recp. Cordless Saw Blades
- Router Bits
- Shop Aids
- Wood Boring Tools
- Auger Bits, Electricians
- Auger Bits, Pipe
- Auger Bits, Ship
- Auger Bits, Short, Monolock® 1/4" Shank
- Auger Bits, Tri-Flute, Monolock® 1/4" Shank
- Bell Hanger/Feeler Bits with Fish Hole, Carbide Tipped
- Bell Hanger/Feeler Bits with Fish Hole, HSS
- Bormax® Hinge Boring Bits
- Brad Point Drills
- Brad Point Drills-Double Land
- Carbide Tipped Dowel Drills
- Carbide Tipped Through Bore Drills
- Famag® Carbide Boring Bits/Set
- Famag® Hinge Boring Bits
- Famag® Vario® Adjustable Countersink
- Power Bit Extensions
- Tenon & Plug Cutters/Set
- Wood Screw Countersink Tool
- Wood Spade Bits/Sets/Displays
- Auger Bits, Electricians
- Screw Driving Tools
- Screw Driving Accessories
- Bit Holder Flexible
- Bit Holder/Driver Quick Lock
- Bit Holders/Magnetic
- Bit Holders/Magnetic/Specialty
- Hex Socket Extensions
- Insert Bits Tamperproof
- Insert Bits/Power Bits
- Keys - L-Keys, Hex Keys, Sets
- Merchandiser/Dispenser
- Nut Setters and Sets
- Square Drive Bit Holders
- Square Drive Impact Sockets
- Torsion-buffer Grooved Bits
- Bit Holder Flexible
- Screwtech® Screwdrivers & Nut Drivers
- Ball Hex Drivers
- Hangerbolt Driver
- Nut Drivers
- Professional Screwdriver Sets
- Screwdriver Bit & Security Bit Sets
- Screwdrivers
- Screwdrivers Electrician's
- Screwdrivers Electronic
- Screwdrivers High-Voltage
- Screwdrivers Magnetic
- Screwdrivers Quick Change
- Screwdrivers Quick Change Marine
- Screwdrivers Tamperproof
- Specialty Screwdrivers
- Wing Nut Drivers
- Ball Hex Drivers
- Specialty Tools, Sets & Kits
- Screw Driving Accessories
- Threading Tools
- Carbon Steel Taps & Dies
- High-Speed Steel Taps & Dies
- Dies
- Hand Taps
- High Performance Taps
- Multi-Purpose Taps
- Pipe Taps
- Special Purpose Taps
- Spiral Fluted Taps
- Spiral Pointed Taps
- Tap & Die Sets
- Tapping Tools & Accessories
Call for all your fastener needs
248-572-4862
or by email
info@fastenersresource.com
Physical Address
4260 Giddings Rd.
Auburn Hills, MI 48326
Mailing Address
P.O. Box 727
Lake Orion, MI 48361
We Accept
CALIFONIA PROPOSITION 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
(California law required this warning to be given to customers in the State of California) For more information: www.watts.com/prop65
Copyright 2024 Fasteners Resource & Industrial Supply
This website designed and maintained by IGD Solutions Corporation